What you need to tow with a 2026 Alfa Romeo Stelvio
2026 Alfa Romeo Stelvio towing by configuration
| Grade | Engine | Drive | Max trailer (lb) | Requires |
|---|---|---|---|---|
| All trims | 2.0L Turbo I4 | AWD | 3,000 | Alfa Romeo publishes this as a single lineup-wide figure with no trim breakdown in the source document. |
Source: 2026 Alfa Romeo Stelvio manufacturer trailering chart · last verified 2026-09-02
The kit for this truck
Towing hardware is sized to the trailer. Pick the weight you are actually pulling:
Before you trust any of these numbers
- Your payload governs. Addition of trailer hitch weight cannot cause vehicle weights to exceed Rear Gross Axle Weight Rating (RGAWR) or Gross Vehicle Weight Rating (GVWR). These ratings can be found on the certification label located on the driver door or doorframe.
- Tongue weight is not free. 10–15% of the trailer sits on your rear axle and comes out of payload, not out of tow rating.
- Engines in this chart: 2.0L Turbo I4. If yours is not listed, this chart does not cover your configuration.
Common questions
How much can a 2026 Alfa Romeo Stelvio tow?
3,000 lb. That is the manufacturer's single published rating for the 2026 Alfa Romeo Stelvio — every listed configuration carries the same figure, so there is no configuration-dependent spread to account for here.
What hitch do I need for a 2026 Alfa Romeo Stelvio?
Size the hitch to the trailer, not the truck. For a trailer up to 3,000 lb you need Class 2 hardware with a 1-1/4 in receiver. The truck's rating is a ceiling you must stay under, not the thing you buy for.
Why is there no payload number on this page?
Because payload is specific to your individual vehicle, not to the model. It is printed on the certification label in your driver's door jamb. Published sources disagree with manufacturers in both directions on payload, so stating one per model would be wrong for most trucks. Your tongue weight counts against payload, which is why it matters.