HaulChartwork out the towing kit you actually need

What you need to tow with a 2026 Ford Expedition

The 2026 Ford Expedition is rated from 6,000 to 9,600 lb depending on axle ratio and drivetrain — a 60% spread. Find your configuration below, then size the hitch to the trailer you are towing, not to the truck's maximum.
A single towing number for this truck would be a lie. 9,600 lb applies to one exact configuration when properly equipped. Same badge, different axle ratio or drivetrain, and the real figure can be thousands of pounds lower. That is why every row below carries its configuration.

2026 Ford Expedition towing by configuration

EngineAxleDriveGCWR (lb)Max trailer (lb)Requires
3.5L EcoBoost V63.734x415,9009,600
3.5L EcoBoost V63.734x415,6009,300Tremor® High Output engine.
3.5L EcoBoost V63.734x415,6009,200Equipped with 24" wheels.
3.5L EcoBoost V63.314x212,0006,000
Axle ratio is the spec that gets left out. It changes the rating materially, and no commercial vehicle-data API carries it — which is one reason third-party towing databases have been measured overstating ratings by thousands of pounds. It is on your build sheet, or decodable from the RPO label in the glovebox.

GCWR is the maximum combined weight of the loaded truck and the loaded trailer. Max trailer weight assumes the vehicle is properly equipped and otherwise unloaded — every passenger and every pound of cargo comes off it.

Source: 2026 Ford Expedition manufacturer trailering chart · last verified 2026-08-29

The kit for this truck

Towing hardware is sized to the trailer. Pick the weight you are actually pulling:

At this truck's ceiling (9,600 lb) you would be in Class 4 hardware with a weight-distributing hitch and a brake controller. See the 9,000 lb kit for this vehicle →

Before you trust any of these numbers

Common questions

How much can a 2026 Ford Expedition tow?

Between 6,000 and 9,600 lb depending on the exact configuration — that is a 60% spread, so a single headline number is misleading. The 9,600 lb figure requires one specific combination of axle ratio and drivetrain. Look up your own configuration in the table on this page.

What hitch do I need for a 2026 Ford Expedition?

Size the hitch to the trailer, not the truck. For a trailer up to 9,600 lb you need Class 4 hardware with a 2 in receiver, plus a weight-distributing hitch with sway control. The truck's rating is a ceiling you must stay under, not the thing you buy for.

Why is there no payload number on this page?

Because payload is specific to your individual vehicle, not to the model. It is printed on the certification label in your driver's door jamb. Published sources disagree with manufacturers in both directions on payload, so stating one per model would be wrong for most trucks. Your tongue weight counts against payload, which is why it matters.