HaulChartwork out the towing kit you actually need

What you need to tow 1,000 lb with a 2026 Mitsubishi Outlander

Every published configuration of the 2026 Mitsubishi Outlander is rated for 1,000 lb. At 1,000 lb you are at 50% of this vehicle's 2,000 lb ceiling. The hardware is sized to the trailer: Class 1 in a 1-1/4 in receiver, a ball mount rated past your 100–150 lb tongue weight, lighting wiring.

Which Outlander configurations are rated for 1,000 lb

12 configurations share the lowest rating that still clears 1,000 lb (2,000 lb). Anything rated below that will not do it. Closest-margin configurations first — the last column is how much headroom is left over.

GradeEngineDriveMax trailer (lb)Headroom
ES1.5L Turbo I42WD2,0001,000 lb
ES 1.5T S-AWC1.5L Turbo I4AWD (S-AWC)2,0001,000 lb
LE1.5L Turbo I42WD2,0001,000 lb
LE 1.5T S-AWC1.5L Turbo I4AWD (S-AWC)2,0001,000 lb
SE1.5L Turbo I42WD2,0001,000 lb
SE 1.5T S-AWC1.5L Turbo I4AWD (S-AWC)2,0001,000 lb
TRAIL EDITION1.5L Turbo I42WD2,0001,000 lb
RALLIART1.5L Turbo I42WD2,0001,000 lb

Showing the 8 tightest-margin configurations of 12 that qualify. Full chart with GCWR →

Source: 2026 Mitsubishi Outlander manufacturer trailering chart · last verified 2026-09-02

Your kit for 1,000 lb behind an Outlander

In the order you should buy it. Every requirement comes from a published manufacturer guide or standard — the full reasoning for each item is on the 1,000 lb kit page.

One number still has to come from you: payload. Addition of trailer hitch weight cannot cause vehicle weights to exceed Rear Gross Axle Weight Rating (RGAWR) or Gross Vehicle Weight Rating (GVWR). These ratings can be found on the certification label located on the driver door or doorframe. Your 100–150 lb of tongue weight comes out of that payload, not out of the tow rating — which is why a truck rated for 2,000 lb can still be overloaded at 1,000 lb once four passengers and a full bed are in it.

Common questions

Can a 2026 Mitsubishi Outlander tow 1,000 lb?

Yes — every published configuration of the 2026 Mitsubishi Outlander is rated for 1,000 lb or more. That is a ceiling for a properly equipped vehicle that is otherwise unloaded — your passengers, cargo and tongue weight all come off it, and your payload is on your own door-jamb label.

What hitch do I need to tow 1,000 lb with an Outlander?

Class 1 hardware with a 1-1/4 in receiver, rated to 2,000 lb. The hitch is sized to the trailer, not to the truck — a 1,000 lb trailer needs the same Class 1 hitch behind any vehicle. Ratings are set per part number, so check the sticker on the hitch itself.

What is the tongue weight for 1,000 lb behind an Outlander?

100–150 lb — 10 to 15% of the loaded trailer. No manufacturer publishes a tongue-weight figure per trailer, because it depends entirely on how the trailer is loaded.

Do I need trailer brakes to tow 1,000 lb with an Outlander?

Not on weight alone — 1,000 lb is under the 1,500 lb threshold GM's trailering guide publishes for this class of vehicle; check your Mitsubishi owner's manual for its own figure. State law varies and some set it lower, so check your state.

Other weights behind an Outlander

Other vehicles at 1,000 lb